Augusta Free Press

Virginia Tech teams with Federal Highway Administration to bring new road safety technology to United States

In a project funded by the Federal Highway Administration, the Virginia Tech Transportation Institute has welcomed the first Sideway-force Coefficient Routine Investigation Machine, or SCRIM for short, to the United States.

The project objective is to assist states in the development of Pavement Friction Management Programs and demonstrate continuous friction and macro-texture measurement equipment.

Pavement friction can sometimes be the difference between life and death on roadways. The higher the friction, the better grip a vehicle’s tires will have with the road. Higher friction can help a vehicle stop or maneuver its way out of a crash.

The project is led by Gerardo Flintsch, director of the institute’s Center for Sustainable Transportation Infrastructure and a professor with Virginia Tech’s Charles E. Via, Jr. Department of Civil and Environmental Engineering. “The continuous friction measurement equipment has the potential to pinpoint pavement sections where the probability of crashes is greater,” said Flintsch.

The instrumentation is housed in a Volvo VHD 430 model truck that will drive thousands of miles through Florida, Texas, Indiana, and Washington, collecting data. The multi-ton truck will continuously measure friction, cross-slope, macro-texture, grade, temperature, and curvature while driving at up to 50 mph. These various measurements will be cross-referenced with crash data to identify potentially high-risk friction areas that can be treated.

“This system is unique because with one data collection pass on the road, we will collect data that allows us to segment the road network into friction demand categories,” said Andrew Mergenmeier, senior pavement and materials engineer for the Federal Highway Administration. “For example, in areas where the potential for conflict is greater, such as tight horizontal curves, this data can inform the need for a countermeasure.”

Prior to the data collection phase which begins this summer, the truck already had a transcontinental journey. It was built at Volvo’s New River Valley Plant in Dublin, Virginia, shipped to the United Kingdom, where the instrumentation was installed and certified by the Transport Research Laboratory.

“We look forward to being pioneers in bringing this technology to the United States and furthering the efforts to save lives,” said Flintsch.

Subscribe

Augusta Free Press content is available for free, as it has been since 2002, save for a disastrous one-month experiment at putting some content behind a pay wall back in 2009.

(We won’t ever try that again. Almost killed us!)

That said, it’s free to read, but it still costs us money to produce. The site is updated several times a day, every day, 365 days a year, 366 days on the leap year.

(Stuff still happens on Christmas Day, is what we’re saying there.)

AFP does well in drawing advertisers, but who couldn’t use an additional source of revenue?

From time to time, readers ask us how they can support us, and we usually say, keep reading.

Now we’re saying, you can drop us a few bucks, if you’re so inclined.

Click here!